Fitting a cat flap can seem intimidating, but it is fairly simple to install by following the correct instructions. First, decide how high you would like the flap to be (on average the belly height). Note this on the door and then use the template provided as a guide to drill.

If you have a small kitten, prop the door open a bit and gradually allow it to pass through. Reward the kitten every time it goes through.

Measure the Door

A cat flap is a wonderful method to let your pet come and go inside and out of your home whenever it pleases. This can help keep your cat in good health as it will ensure it is getting enough exercise and also be able to return inside if it gets trapped in the elements during bad weather. This will reduce the amount of time you spend letting your cat go in and out, and keep your home safe by notifying you when it has left.

It is important to ensure that the cat flap is placed correctly to stop your pet from being pushed through or escaping through it by other animals (e.g. dogs). It is important to measure the height of your pet's belly as well as the doorway to your home in order to ensure that the flap is at the proper height. If your cat is a little taller or shorter than average, you can alter the position of the flap by moving it up or down by a tiny amount.

Next, use a spirit-level to mark the middle of the door. This is where you will put in the flap. Then, using the markings as an indication, cut out the form of the flap on the door with the aid of a Jigsaw. Once you have cut out the area, sand the edges of the door to create smooth surfaces and drill any fixing holes that are needed.

The process of installing a cat flap installers flap is not as difficult as you may think, and it shouldn't take more than two hours for the entire task from start to the end. The process is a bit more difficult if you have to put it in the form of a uPVC door or a composite one. This is because these doors come in a variety of thicknesses, which can impact the way holes are cut. This is why we recommend hiring a professional to carry out the work, particularly if you have never worked with glass before.

Measure Your Cat

A cat flap can save you from hearing your pet's cries to let it in or out. This is particularly useful if you are at work most of the day and your cat is inside waiting until you get home in all weathers.

If you are planning to install a cat flap in your door, it is essential to measure your cat before attempting the task. It might seem like a straightforward task, but it's crucial to make sure you measure the right measurements. If not, your cat might find it difficult to use.

First, ensure that your cat is calm and not stressed prior to taking the measurements. You'll need to put your cat in a place in which they cannot move. Also, ensure that the measuring tape is straight and not bent against their body. By keeping the ruler or measuring tape against their body from the top of their head to the tip of their tail will allow you to make an accurate measurement.

Once you've got your cat's measurements, it's time to look at the door to determine where to place the flap. Place the flap at the level of your cat's belly. This will allow them to walk through the door with minimal effort. This will also stop the flap from making a lot of noise as it swings open and shut.

You should take into consideration the thickness of the uPVC or composite door too. While all doors made of timber have a similar thickness, uPVC or composite doors are different in their overall design. This makes the process of putting in an enclosure for your cat more difficult since you need to ensure the hole is the right size.

You can make use of the template included in the instructions to mark the position of the opening on the door. This will allow you to determine where the hole must be placed and ensure that the template is set properly on the door. It is also a good idea to employ a spirit-level to ensure that the template is placed perfectly against the door.

Cut the Flap

You will need to cut an opening in the door panel for your cat flap prior to you can attach it. This can be a tricky job and it is recommended that you seek out the assistance of a professional cat flap fitter to complete this task in case you don't have the expertise or knowledge to complete the task yourself. It is also recommended to consult the instructions that come with the cat flap kit to learn how to do it correctly.

You can consider the height of your cat's or kitten's stomach as a reference. A good rule of thumb is to place the cat flap about 10-15 centimeters off the ground, as this is roughly the average belly height for cats. This will allow your cat to move through the flap without difficulty and will make it difficult for other cats or nosy neighbours to get inside or out.

Draw the location of the cat flap on the door with a pencil. Next, if your kit includes an outline of paper, place it over the door and use the marks to drill holes in every corner of the template. Then, you should be able cut out the template's shape and replace it with your cat flap.

You can install your cat flap yourself on the door made of wood or uPVC If you're comfortable using the jigsaw. Ensure that you do not cut through any of the door's mullions or vertical rails. You can use a jigsaw to cut the panel into a square or circle, depending on the design of your cat flap. Be patient and don't try to make the jigsaw cut faster.

Once the hole has been cut, carefully place the cat flap in bifold doors flap into its new place of residence. Make sure that it is securely secured. If it features caps for screws, then put these onto the protruding screws. After the screws are installed then sand the rough edges and seal any gaps. This will prevent draughts from entering your home.

Place the Flap

If you have a basic cat flap you can open it and encourage your pet to use it by putting a little bit of cat food in front of the door. You can also push the cat using sticks or your hand. Once your pet has become comfortable walking through the flap, it will be able to come and go at will. This will allow you to let it in and out whenever it wants.

It is possible to fit the flap inside a UPVC door or a glass door, however it's not as simple as putting one in a wooden external door. This is because the UPVC doors and certain types of glass doors don't have a uniform thickness. This could have a dramatic effect on how you cut the hole for the flap, and can also affect whether your flap is fitted correctly after it has installed.

Depending on the model of cat flap you pick It may come with its own mounting kit and template that will tell precisely where to drill holes for it. If the kit doesn't include a template, you are able to make one by yourself. It is important not to push the jigsaw too hard when cutting, so it doesn't leave a bigger than needed hole in your door.

Most cat flap bifold doors flaps are rectangular or square in shape, however there are also some which are circular, and are typically more difficult to fit. If you have a round flap, make sure the hole is in the right place on your door. In the event that it is not, the cat may not be able to use it, and might be outside all day (or night).

Some cat flaps have locks that permit you to manage when your cat comes in and goes. They can be extremely useful if you're concerned about your window cat flap going out at night and coming back in due to the darkness, or if you're at work all day. Certain locks can be used to lock entry or exit, and others can be locked both ways. This is useful for sick or older cats who don't want to go outside in bad weather.