Protect Your Pride And Joy With The bmw m4 ghost installer Immobiliser

Protect your pride & joy from theft by using the Ghost Immobiliser. This system is discrete and does not require any additional key fobs to operate.

The device makes use of buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be altered up to 20 times. This allows your vehicle to begin.

Simple process to change the PIN code

With the growing rate of vehicle theft, a lot of owners are looking to improve their security. There are many types of security products that are available including tracking systems, immobilisers and alarms. However there are a few that are equally efficient in protecting your vehicle. While a tracking system may assist you in locating your vehicle in the event of theft, it does not stop the crime from happening in the first in the first place. An immobiliser, on contrary is exactly what says on the label: it shuts off your car's engine so that it cannot be started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your vehicle.

By using the buttons that are already present in your car The ford fiesta ghost installer device generates an exclusive sequence that has to be entered before the car's engine starts. This can be done via the indicator stalk windows or heater buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the button sequence. This is a great option for those who want to offer your car to valet parking or for maintenance. The immobiliser will stay active.

The Ghost is an innovative and unique device that works by using your vehicle's buttons rather than as a separate unit. It's not just an effective deterrent to theft of your vehicle and vandalism, but it can also be used on any future vehicles you own. This makes it a much more cost-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost autowatch immobiliser, Learn Alot more Here, immobiliser is a high-tech security device that protects your car from key cloning, hacking & ECU swapping. It's a small weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus to disable the motor. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to ensure that it is compatible with all vehicles. It also is resistant to jamming devices which is the most common method used by car thieves to circumvent existing immobilisers.

The benefit of CAN data over traditional systems is that they operate silently. It isn't detected by sophisticated RF scanning and code-grabbing technology, nor can it be identified by conventional diagnostic tools. The Autowatch ghost immobiliser reviews doesn't produce LED indicators and instead uses the buttons on your vehicle like the steering wheel, centre console or door panels to create a unique, programmable disarm sequence. You can make this sequence up to 20 presses long for added security. The iPhone app only allows one connection, using an individual pairing code for the Ghost. All communication between the two devices is secured.

The Ghost also stops car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser and start the engine. The engine will only run only if a valid PIN has been entered. It is possible to operate temporarily in the Valet/Service mode (with parameters set such as 30mph speed limit) which means you can give your car to an attendant or valet without entering a code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that is able to be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts signals to stop your car from starting normally until you enter a custom code. The system can be activated or deactivated using your own smartphone application without the need for wires.

Standard factory immobilisers in vehicles function by using a transponder inside the key, which sends an electronic signal to the ECU. The car will start when the correct code is sent. However, if the transponder from another vehicle is used instead, the immobiliser won't recognize it. This makes it possible for the vehicle to be stolen and started. The Ghost immobiliser was created by a South African company at the forefront of vehicle security systems technology. It shields you from hacking or key cloning and even key theft. The only way a thief could take your car is by physically towing it away and even then they wouldn't be allowed to drive it.

Ghost makes use of buttons on your vehicle, such as the indicator stalk, steering wheel, as well as the door panels, to generate a unique PIN code which must be entered to use your car. This is done without additional hardware, like a keyfob. It can take up to 20 presses. It is also inaccessible to diagnostic equipment and doesn't transmit radio frequency signals so thieves are unable to utilize sophisticated RF scanning or code grabbing technology to detect that security systems have been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is hidden within the vehicle to ensure that it can't be taken away or disabled by thieves. It's even more difficult to get rid of than a car alarm, which requires disarming with a button sequence. This makes it a fantastic alternative to a GPS tracking device, which can be used to locate your vehicle after it's been stolen.

Override of emergency PIN code

You don't need to look too far on social media to see stories or even videos of vehicles that were stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow them to start your vehicle without your original key fobs.

Our Ghost immobiliser combats this and provides you with an additional layer of protection to stop your vehicle from being stolen if it is targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel, and the centre console. The unique pin code must be entered together with your original key fob to prevent the vehicle from beginning. The unique override pin can be located on a black card that you receive following your installation. It is easy to remember because there are no LED indicators.

The device is hidden in the vehicle's wires and does not emit radio signals, so it isn't able to be recognized by thieves using diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Contrary to other security systems that rely on a relay located in the engine bays, immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely with an electronic block of commands for both the ECU and the engine.

These systems can also be linked to a separate alarm immobiliser, tracker or alarm. This must be specified prior to installation. They are also service/valet-mode compatible and are a great alternative to a tracker when having your car in for repairs to an electrical issue at the dealership.

Service/Valet mode

In recent years, there has been a increase in vehicles being stolen with no owner's keys. With the ease of access to key cloning equipment and door lock pick sets, it is now much easier for thieves to take your prized possessions. We have created the Autowatch ghost immobiliser problems Immobiliser to combat this. It prevents your car from being driven, even if you keys have been cloned.

It communicates directly with your car's ECU (Engine Control Unit) via the CAN data loop. It's completely silent since it doesn't utilize radio frequencies or a key fob. It can't be detected by diagnostics or any other hacking device. It also shields against the possibility of adding the key to a new one or replacing the ECU to bypass the system, since only the correct PIN code will allow the engine to start.

The device is hidden in your vehicle and is accessible via buttons on your steering wheel, center console and door panels. A unique & changeable PIN code sequence of up to 20 digits must be entered before you can start your vehicle.

This is the very first aftermarket CAN-bus immobiliser for the market that was developed. It can prevent your vehicle from being started or driven in the event that you do not enter a PIN code first. If the device is activated and you try to drive away, it will display an indicator on your dash, which will flash continuously for about 300m. If you type in your PIN code at this point, it will deactivate the anti-hijack system and your vehicle will continue to drive as normal. If you do not enter your PIN code at this time the indication will continue to flash and require another PIN code for every attempt to start your car.