Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace and will usually fit into the frames that were previously in use very easily. If you have double glazed window repairs-paned windows that are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards will fall onto the cloth rather than on the floor, where they could be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from getting into your home until a professional arrives to fix the window. This will also provide an obstruction to prevent intruders from getting into your home. If the distance between the window and the door is large, you might prefer an alarm system that includes windows. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. However, with time, they may be afflicted by a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act immediately if you notice your uPVC windows are sliding.

To fix a sagging window repair you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can access the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you can't reposition the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loose their elasticity. It is crucial to replace your seal as quickly as you can to keep your upvc window repair window watertight and draughtproof.

uPVC handles could also become loose. This is usually due to screws that have become undone over time, but it could be caused by the handle mechanism wears out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to shut the window and do an initial fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

It is a fairly easy fix that can be completed by any DIY expert. Depending on how serious the issue is, old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

Check that any drainage holes have no debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A upvc window repairs near me specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window repair near me is difficult to open or if it opens with a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical component hinges will wear out over time. The process of replacing a hinge on a window is an easy process but it can be simpler when you have a person to help hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. This can be done by checking for the arrows on each hinge. This indicates the direction in which the window should open.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. This can often be resolved by sending us a photo on our website. We will be happy to give you advice.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges may also become disaligned as a result of wear, which can cause an opening where the sash and frame meet. If they are damaged beyond repair, it might be necessary to have them realigned. Second, the interlock can also become unbalanced. It is located on the hinge's side and could require to be cleaned. In certain instances it might be necessary to replace these.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help stop draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They will help stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security for your home with regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and they may reach the point when it's more efficient to replace them than fix them. If you have any problems with your upvc window, it's best to consult an expert immediately.