How to Replace a Nissan Juke Spare Key

Nissan Juke is a fun and stylish hatchback that has an unusual engine configuration. It's a bit noisy, but it's still enjoyable to drive.

The key fob battery on the Nissan Juke must be replaced every two years or every two years, or when it's low. It's easy to do at home, however you'll need a few tools.

Dead Coin Battery

If your Nissan Juke key fob isn't working the first thing you need to look at is the coin battery inside it. It could be dead and requires to be replaced. This is a quick fix that will take only a few minutes. It's as easy as flipping the fob over and removing the small latch/release on the back. Remove the old battery and then pop in an alternative one, making sure it's facing downwards on the fob. Line between the two halves of the fob in a careful manner.

If the fob was exposed to water, it will need to be cleaned prior putting the new battery in. This can be done by using a paper towel along with isopropyl alcohol or electronic cleaner, and waiting for it to dry completely prior to re-inserting the battery.

The key fob also needs to be connected to the vehicle in order to begin the engine, which can be accomplished by following the directions in the owners manual or using an OBDII scanner. If the key fob has not been connected, this is the most likely reason of why it stopped functioning. A damaged chip in the fob could cause it to stop working however, this is a rare. A new receiver module could be needed in this case. If this is the scenario, the module will need to be replaced by a certified technician.

Water Damage

The key fob is powered by batteries, and the batteries need to be changed every two years or more, or at the first sign of the car not responding when you hit the "start" button. Keys are fitted with rubber seals to keep water out, however submerging the key fob into the ocean or in a pool can cause damage to the chip inside. If this happens you'll require a new key from Nissan or an automotive locksmith.

It's possible that the computer lost connection with the key fob, which could be due to a number of reasons. A simple restart of the car will fix this issue, but should the key be displaying the "Key ID" error message, you'll need contact Nissan or an auto locksmith for help.

The three most common causes of this issue are dead battery on the key fob as well as a key that is not programmed and a damaged or malfunctioning key fob that has been damaged or broken. The first two causes are fairly easy to fix while the third one is more difficult to pinpoint and fix immediately however, it can be fixed with patience. Compare nissan key replacement nissan car key (read this blog article from Bravejournal) costs near you using WhoCanFixMyCar and schedule your repair online. You can read customer reviews about local Nissan dealerships, Nissan mechanics, and garages in just a few seconds.

Faulty Chip

The key fob on your Nissan Juke has a special chip that transmits a signal to the car whenever you turn it. If the chip is not functioning properly it could cause the key to cease working. If this is the case, the problem can only be solved by replacing the key. There are many reasons your Nissan Juke's key could be damaged, including water damage, a dead coin battery or a damaged receiver module.

Check the chip for any water damage If your key fob has stopped working after a bath or wash. Check that the clips that hold it in place are secure and that the chip is not exposed to any water. If you observe any signs of water damage on the electronic component, remove the battery and wipe it down with isopropyl ethanol or electronic cleaner.

If the chip is not working You'll need to contact your local locksmith or dealer. They will need the year model, make, and year of your vehicle in order to find a replacement nissan car key. Also, you will need to note down the VIN (Vehicle Identification Number) to ensure that the locksmith or dealer can identify the key you have. This will allow them to verify the correct key code, and ensure that they cut the correct one.

Faulty Receiver Module

The key fob sends a radio signal to your car to perform various functions. It can unlock the trunk as you rush to get groceries or start your car by pressing the button on the fob. It can also open your windows and turn on the horn if you accidentally lock the keys in your car.

If the key fob isn't able to work, it may be due to a problem in the receiver module. The receiver modules are tuned to ensure they can receive certain frequencies that correspond to signals that are transmitted by Nissan key fobs. If your car has an unreliable receiver module it will not respond to any signal received from the key fob.

It's always a good idea to have an extra Nissan key fob in case your original key gets lost or breaks. A spare key can be programmed by a locksmith or dealership to work with your Nissan and can help you avoid the anxiety of locking your keys inside your car or losing them.

If your Nissan Juke's key fob has been exposed to rain or clean tap water, you can resolve the issue by cleaning it with isopropyl, or an electronic cleaner. If the chip has fried, you'll need to buy an alternative keyfob that could be programmed for your vehicle by a locksmith or dealer.