Fiat 500 Key Fob Replacement

If your 500 keyfob stops functioning, try another to test if it will be recognized by the car. If it does, the issue may be with the battery or water damage on the original fob.

Replace the battery first. Make sure that the new CR2032 coin battery is properly inserted with the "+" side facing down on the fob.

Dead Battery

Most of the time when a fob doesn't work, it's just because the battery is dying. This is easy to repair and most fobs notify you that the battery is failing. You can find the correct procedure for the majority of car fobs YouTube or in your owner's guide. You can also replace it by taking it to an authorized locksmith or a dealer who supplied it to you.

Sometimes, a fob may stop working and there may be an issue with the circuit board inside. It's not a common occurrence but it can occur. The internal chip may be damaged in the event that you drop the fob over something hard. This can also happen when you use an aftermarket key and the fob won't work. In this situation it is imperative to visit a dealer or locksmith to have the key reprogRammed to work with your 500.

One 2012 fiat 500 replacement key near me 500 Flip Key Remote - resembles Ilco brand with trunk, lock and lock buttons. It is a replacement keyless entry remote (will need to be cut & programmed by a locksmith)

Chip Damaged

A key fob from Fiat 500 is a wireless device that provides the signal to the car to start when you push the button. It has a microchip containing information about the code needed to connect with your car. If the chip is damaged it won't transmit the correct code, and the car will not start. It's possible to repair this type of damage and a locksmith could assist. United Locksmith can complete this repair on both classic and newer models, so do not hesitate to contact us.

A locksmith can program the new key fob. This is a lot less expensive than going to a dealer and it works similarly. Locksmiths will require specific details from you, like the year in which your vehicle was manufactured as well as the model's name.

Rub the chip with an old dollar bill if you're not sure what to do. The copper on the bill is abrasive enough to get rid of dirt and oxidation however, it won't cause damage to the microchip. If the chip is physically damaged it might not be repairable. This could happen if you drop it or get it pushed over by your vehicle.

Water Damage

If you've accidentally dropped your keys in the water, put them in your bag while swimming at the beach or splashed them with water on a rainy afternoon it's likely your fob will have some water damage. Even if it's just tiny amounts of water on the key, it can cause serious problems with its electronics.

It is possible to solve this problem by getting rid of the fob and then cleaning it using a paper towel. After the fob is dry you can then replace the battery and it should begin functioning normally.

You can also take the fob to a local locksmith or auto shop to get it professionally cleaned and programmed. These professionals will use special equipment to make sure that the key fob is compatible with the car's computers.

When your Fiat 500's key fob ceases to work, it could be stressful and frustrating. It's costly and difficult to transport your key fob to a dealer. Locksmiths can handle all aspect of the replacement of your car's key fob without the requirement of a dealership trip. Locksmiths are better than a dealer since they can take care of all aspects of your car's key fob replacement without the need for a dealership visit.

Pairing Issues

If you drop your keyfob, or it ceases to function, and nothing else appears to be wrong, it may be the chip. This could be due water damage or an unresponsive battery.

This can be accomplished by simply following the directions in your owner's manual. However, it's a good idea to get an auto locksmith perform this procedure if you're having difficulties or the steps in your manual aren't working for you. This will ensure that the chip won't be damaged and is the cheapest solution.

Another issue facing 500 owners is that the key fob will not lock the car. This can be a problem if you need to refill at gas stations. Some owners have even reported the locking mechanism of their 500's malfunctioning and they had to replace the entire intermediate shaft for steering. This issue has been reported in a technical service bulletin (TSB) issued by Fiat 500 Key Button Replacement.

If you're having trouble with your Fiat vehicle, a reputable locksmith can help. They can duplicate your existing key or design an entirely new one that can unlock and start your vehicle. They can do this without seeing your old key, and it's usually cheaper than buying a new one from a dealer.