Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to ensure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively easy to replace, and they typically fit into frames of the past easily. However, if you have double-pane windows that are secured by internal beading, it will be more difficult to remove the existing panes and install new ones. In this instance, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass so that any shards fall onto the cloth instead of landing on the floor where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will keep drafts and water from entering your home until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap between the door and the window is large, you might prefer a security screen that also has windows. This will give you the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sliding. A sagging uPVC window repairs near me can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from getting worse.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need open the window to get to the frame. Then, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've repositioned your hinges. If you are happy with the fit of the window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows are waterproof and secure from draughts.

uPVC handles can also loosen up. Most often it is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and then perform an initial fitting. The corners of the sash should align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

It is crucial to take action if awake each day to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the issue is, the old caulking might need to be removed. It is important to keep in mind that when it comes to upvc window repairs; page,, do not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window repairs near me.

Mold spots and rotten sills are other signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with ease, it may be hinges that are at fault. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It is very easy to change the hinges on a window but it's much simpler if you have someone to help you to hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrow on each hinge, this shows which way the window should be opened.

The problem can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us photos through our website can often solve the issue. We are happy to give advice.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window sticking and prevent corrosion. The ideal time to do this once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again due to wear and tear may become displaced, which can cause an opening to appear where the sash joins the frame. If they're beyond repair, it may be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window, may also become misaligned, again it is possible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The next common reason for draughts are the window seals. These can become worn down or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder, these are typically made of fabric filled with some sort of filler and can be placed on top of your windowsill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and they may reach the point when it's more cost-effective to replace them rather than repair them. If you are having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.