Ghost Immobiliser Installation

Add a ghost immobiliser to your car to safeguard it from car thieves. Our TASSA certified system guards vehicles from hacking, key cloning, and vehicle immobiliser bypass.

The system is hidden in your vehicles wiring loom so it's completely invisible to anyone who is looking. It operates by generating pin code push sequences that are activated by buttons already present on the steering wheel, door cards and centre console.

No circuit cuts

It's not a surprise that people are concerned about protecting the car they've worked so hard to buy. However, traditional security devices such as wheel locks and alarms can easily be cut off or bypassed by thieves. A ghost immobiliser is a very effective and efficient solution that operates in silence and can't be identified by modern thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with your vehicle's ECU through existing buttons on the steering wheel, dash, and door panels to generate a unique pin code that only you can access. The code can be altered at any time and can include up to 20 digits depending on your preferences. It also comes with a secure emergency code that you can utilize if you forget your PIN.

The ghost immobiliser is also useful to prevent the relay box inside your home from transmitting the signal from your car key, which would open the doors and start your vehicle. It also blocks advanced methods of stealing your vehicle, like OBD port hacking. The device is small, weatherproof and difficult to detect. It's also very difficult to tamper.

The ghost immobiliser also has an advantage: it can be fitted to your vehicle without leaving any permanent marks. This makes it ideal for people who plan to sell their vehicle in the future. It is also much quicker and easier to install compared to a factory-fitted unit.

The Autowatch ghost immobiliser review, a cutting-edge new-generation device, prevents thefts of cars using contactless technology by connecting to the CAN network of a vehicle and using the existing buttons to generate an unique PIN code. It is a discreet device that can be installed without cutting wires and does not require additional key fobs. It is also connected to the original ECU of the vehicle, thus preventing thieves from by stealing it using a new key. This system is TASSA certified and is connected to an International Security Register, allowing owners to have peace of mind knowing that their vehicles are secure from theft.

No RF scanning

You'll want to safeguard your vehicle from theft when you have spent lots of money and effort to customize it. One way to do this is by installing an immobiliser, which will prevent your engine from running until you enter a unique PIN code. Utilizing the buttons on your steering wheel and dashboard, you can generate an up to 20 digits long which is only known by you, making sure that only you are able to drive your vehicle. It is also possible to set up a service and valet mode that will allow you to start your car for a short period without entering the PIN. This will permit your technician to work on your vehicle without you being present. This is an excellent option for people who are looking to cut down on time and make their life simpler.

Ghost immobilisers are next generation device that connects to your vehicles CAN data network and uses the buttons on the dashboard and steering wheel to program a unique PIN code. It is designed to be discreet without any LED indicator or noise to signal it, and can be fitted anywhere on your vehicle without disturbing the aesthetics of your prized possession.

This stealthy system is TASSA approved and can cut down on your insurance costs. It also has the ability to track that can track your vehicle even if it's been stolen. This is useful if you own a unique or expensive vehicle that you've invested a lot of time in making it your own.

Autowatch Ghost, in conjunction with the iPhone app allows you to remotely start your car in the event that you've forgotten your PIN code or are unable to access your vehicle. This feature is perfect if you have to run errands or drop off your kids but don't want to risk having someone else drive your vehicle. This feature is beneficial when you need to take your car to a mechanic to be repaired or serviced.

The Ghost has the advantage that it does not transmit or detect radio frequencies which means it's not detected by thieves using RF scanning and code grabbing techniques. It also shields your vehicle from key copying, ECU swapping and other typical methods of theft.

No key to cloning

Ghost immobilisers are a great option to protect high-end vehicles. They are designed to block key copying. They work by preventing your car from starting unless an additional PIN code is entered in conjunction with the normal key fob. This makes it difficult for thieves to steal your vehicle, and may even discourage them from trying. This is a good idea in the event that your vehicle has been heavily customized or if it's an uncommon model.

These immobilisers connect to the vehicle's onboard CAN data network and are completely hidden meaning that there is no visible indication of its presence inside the vehicle. It is also impossible for thieves to identify the device using radio frequency scanning or code grabbing technology. This means that a criminal will have to spend longer to take your car.

A thief will need to be aware of the unique pin sequence and the location of the bmw m2 ghost installer - a cool way to improve - in order to get around it. But, the pin code will be specific to you and can be altered as many times as you'd like. The pin code is easy for you to remember but mathematically impossible for anyone else to understand. The engineer will also provide an emergency pin number in the event that you forget the pin.

The Ghost CAN Bus immobiliser is able to be easily mounted anywhere on your vehicle. It works with all vehicles and is completely customizable to match the appearance of your car. It is also very easy to use and affordable. The device can be transferred to a different vehicle, as long as it is compatible with the new vehicle.

The CAN bus can be used with other security features. It is able to, for instance, detect damage to the vehicle and notify the owner. It will also shut off the engine in the event that the car has been tampered with. The system can protect your vehicle from hacking and key duplicate. It also detects vibrations or contact with the vehicle. It will also notify the owner when the vehicle is moved.

No OBD port hacking

Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from trying to hack into your vehicle to disable your alarm, turn off your key fob, and make new keys. This technology is a significant improvement over the methods employed by thieves in the past to steal your vehicle. The CAN data network also ensures that the system won't be affected by disconnecting or changing your battery.

The Autowatch Ghost, the first non-detectable CAN bus immobiliser aftermarket in the world, protects against key-cloning, hacking, and replica car theft. It does not utilize LED indicators or key-fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.

Modern thieves utilize diagnostics to identify circuit breaks on your vehicle. They can bypass immobilisers which require a lot of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It is not able to be identified by diagnostic tools that are professional. It can be used on vehicles equipped with anti-theft devices.

A Ghost immobiliser also has a significant benefit: your car can only be started by someone who knows your PIN code and physically has access to your vehicle. This is a significant advantage over security systems that can be tampered with by simple cable tampering or a screwdriver.

If you forget your PIN, you can reset it using the emergency PIN reset function on a cell phone or computer. This is useful if you need to start your car after it's been left in a garage, or the valet parking service.

The Autowatch Ghost 2 has been accepted for insurance by TASSA and is able to be installed by our authorized installers. It features the QR fingerprint system to allow specific parts to be identified, which will enable the return of stolen parts in the event of their being found, and it can be switched into 'service mode', which will allow the engine to start when the vehicle is in a garage, or using valet parking, but you have to enter your PIN code to exit the vehicle again.