Double Glazed Window Repair

Most double glazed windows come with a warranty, and it's important to know what this covers. Generally, it includes any issues with the hardware of the window such as hinges and locking mechanisms within the first 10 years.

Mist between the glass windows can be caused by a break in the seal, and it's something that must be fixed quickly to prevent mould or damp growing in your home.

Condensation Between the Windows

If condensation appears between your windows, it is an indication that the seal holding in the gases that insulate the window has failed. This can be a serious issue that should be addressed as soon as possible particularly in winter, when humidity is at its highest. It could also cause damage to the sills or sealants and also cause mould.

Ideally double-glazed windows should not be able to experience condensation between the panes. This can be caused by excessive humidity or a particularly cold snap. Fortunately, it is repaired without replacing the entire window. A professional can make tiny holes in the window and then spray a special cleaning solution inside. The water is then removed from the window and an anti-fogger is installed to prevent the accumulation of moisture from happening again.

Condensation in the windows could be due to air leakage or other causes outside of the window. In this scenario it can take a longer time for the condensation in the window to build up, as the air must be warm enough to vaporise the water molecules. In these situations, it is better to replace double-glazed windows rather than trying to repair the sealed units.

A double-glazed glass window is composed of two or more pieces of tempered insulated glass that are joined by a metal framework. The gap between the two of the windows is filled with a non-toxic gas for insulation like argon or Krypton and then sealed tightly. The seal stops the insulating gases from leaving and also stops moisture and air from entering the gap.

As windows age, seals can be damaged, allowing moisture to enter between the glass panes. If the seals begin to leak it is essential to notice this because it means that the double glazing is no longer performing as efficiently as it did before. This can lead to a decrease in efficiency in energy use, higher heating costs, damage to the property, and the risk of condensation developing between the windows.

Mist

It is normal to observe condensation on your windows. This indicates that your double glazing system is operating well and is able to keep heat in your house. The condensation is caused by the air outside is hotter than the glass, and then reaches the dew point of the window before the air inside. Double glazing that is of the highest quality is an excellent way to achieve this.

If the condensation is on the inside of your window then it could be a sign of a ventilation issue in your home. This is because the excess moisture isn't going anywhere and is deposited on your windows as well as in carpets, on furniture, and in other areas within your home. Getting this checked out by an expert and ensuring that there plenty of fresh air moving through the home will help avoid it from happening in the future.

Another reason for mist to appear on double-glazed windows is because the seal between two panes of glass is broken. This can be caused by wear and tear or by using chemical cleaning solutions. If this occurs it is best to have the windows repaired as soon as you can.

Repairing your windows professionally will ensure that they remain waterproof and free of condensation, fogging and misting. It's also less expensive than replacing them completely and will also help you save money on your energy bills.

A FENSA registered window installer will offer a price for repair or replacement of your double-glazed windows. Upgrade your windows to energy-efficient A-rated ones in the event that they are extremely old.

It is a great idea to keep copies of any warranties or agreements with your window fitting company. This can be extremely helpful in the event that any issues with your windows develop in the future, and you then contact your installers to resolve these issues. This is a far better option than not addressing the issue that will only get worse and could lead to other problems in the home.

It is difficult to open or close

When double glazed windows are difficult to open and close, it's not just a nuisance, it can lead to increased energy bills due to heat loss and draughts. It can also pose security risks, particularly when the locks aren't functioning properly. It is vital to fix any issues with double-glazed doors and windows as soon as you notice them.

If you are unable to open your window and have tried the most basic of solutions such as using a screwdriver to pry it open or tapping around the frame with a tough object, the issue could be more serious. The window could have moved and needs to be reset or there could be a gap between the glass and frames. In either case, seek out a double glazing repair expert to ensure that the repairs to upvc windows are done correctly and to avoid any further issues.

It's not uncommon for UPVC window handles and lock mechanisms to get stuck or difficult to operate particularly when they're old and worn. This is usually due to a build-up of dirt or grease inside the handle. This is easily fixed by cleaning it with a upvc windows repair cleanser. If this doesn't work, you can try gently tapping the uPVC frame using a hard object, such as a screwdriver, taking care not to scratch the handle or the mechanism for window handles.

If this doesn't resolve the issue then the window will have to be replaced as the hinges might not be in the correct position or the locking mechanism may be damaged. In this instance, you must contact a specialist UPVC window repair expert.

David The Window Wizard specialises in all technical aspects of double glazed window and door repair, including fixing a jammed or shut double glazed window. He has a lot of experience in converting older window mechanisms into modern. This could save you money in the replacement of the entire window. For more information or to book a free quote call or email us today.

Warping

Double-glazed windows can be an excellent way to save energy in your home. They are made up of two distinct panes, with a spacer gas or air between the panes, creating an airtight seal that keeps cold air out and warm air inside. However in time, these windows can be damaged or broken and require repair. Fortunately, the majority of these repairs are simple and can be completed without the expense of replacing the entire window.

Warping is a common problem when double-glazed windows are installed. The windows start to bend, bow or twist, which can impact the structural integrity of the window and its insulating capabilities. Double glazed windows should be installed correctly and maintained regularly to avoid this problem.

If your double-glazed windows are starting to warp, it is important to contact a specialist immediately to help prevent the situation from worsening. They will be able inspect your windows to identify the root cause. They will employ special tools to correct your problem and ensure that you windows are fully sealed again.

Water vapour can trigger this problem, as it may build up between windows over time. This can be caused by many factors, including weather conditions such as humidity levels, temperature and fluctuations. To resolve this issue the expert will drill a small hole through the window to release the moisture. The specialist will apply an agent for cleaning on the glass to clean it, then apply an adhesive.

If your windows can't be shut or opened it could be due to a malfunctioning mechanism or hinges. It is advisable to lubricate the parts of the window prior to calling in a professional, as this may resolve the issue and decrease the necessity for replacements. If your windows are worn out or do not provide the insulation you want It may be better to replace them.