Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They don't decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and generally fit into old frames very easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance you'll need to find some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.

If you plan to try to remove the window panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards will fall on the fabric rather than on the floor where they can be trampled on and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your home until a professional comes out to fix the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap between the window and the door is significant, you may need to consider an alarm system that includes windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may develop a variety of issues that include sliding. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows to reach the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close your window and verify the an appropriate fit. If you're satisfied with the size of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it could be due to the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. First, you'll need to shut the window and then perform an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

It is essential to act if you get up each morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how serious the issue is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and could reduce the efficiency of your energy.

Verify that the drainage holes do not have debris in them and that the sill pan has been angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is related to the seal, not the frame. Again this can easily be corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze, it may be the hinges that are at fault. These are easily replaced by any competent DIYer and are usually completed in just a few minutes.

Like any mechanical component hinges will be damaged over time. Changing a window hinge is an easy process but it can be easier to do if you have someone to help you hold the frame in place.

Check that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused by opening the window incorrectly or by a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are more than happy to offer assistance.

It is also essential to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. The hinges may also become misaligned due to wear, creating gaps where the sash and frame meet. If they're beyond repair, it may be required to realign them. Second, the interlock can also become disaligned. This happens on the hinge's side, and could require to be cleaned. In some instances it might be necessary to replace them.

The second most frequent reason for draughts is window seals. They are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc window repair near me with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking out cold air.

With a little maintenance and repair, your upvc windows will continue to provide an excellent level of insulation and security for your home. It is crucial to recognise that all windows have a lifespan and there may come a point where it is more economical to replace them than repair them. If you are experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.