Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace windows, and the new one is usually able to fit into the old frame very easily. If windows with double glazed window repairs near me panes are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance you'll need source some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

It's a good idea to cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your home until a professional comes out to repair the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you may want to consider using a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they may be afflicted by a variety of problems including sliding. A window that is sagging can cause problems with light, draughts, and even security. It's crucial to act immediately if you notice your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need open the window so that you can get to the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's crucial to replace the seal as soon as possible so that your upvc window repair windows are watertight and draught-proof.

uPVC handles may also loosen. Often it is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need close the window and then perform an initial test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on how serious the problem is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread throughout the home.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it opens in an ease. Anyone with the skills to fix them can replace these in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It is very easy to change the hinges on a window however it is simpler if you have someone to help hold the frame.

Check that the uPVC hinges are closed and open in the proper direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or by poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a great way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. The ideal time to perform this every year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges can also become misaligned due to wear, which can cause gaps where the sash and frame meet. If they're beyond repair, it could be required to realign them. The interlock, which is on the hinge side of the window, may be misaligned. Again, it is possible to give them a clean but in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts are the window seals. They are prone to wear or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc window repair with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the risk of draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes filled with some sort of filler and can be positioned on the top of your windowsill. They can keep your home warm by blocking cold air.

With a little maintenance and repairs windows made of upvc will provide an excellent level of insulation and security for your home. However, it is important to recognise that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than fix them. If you are experiencing issues with your upvc window you should consult a professional as soon as you can.