Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They do not rot or rust like aluminum and timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance, you will need to source some plastic spacers to assist the new pane to fit properly into the frame of the window.

If you plan to attempt to remove the glass panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trodden under and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will prevent drafts and water from getting into your home until a professional is able to repair the window. This will also provide an obstacle to stop intruders from getting into your home. If the distance between the window and the door is large, you might want to use a security screen that also includes a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. Over time, they can be affected by a variety of issues that include sagging. A sagging uPVC window could cause issues with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows so you can get at the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you are happy with the fit of your window, you can tighten screws to keep them in place.

If you cannot reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and secure from draughts.

upvc Window Repair handles can also become loose. Often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and do a test fitting. The joints at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Based on the severity of the issue the old caulking may need to be removed before a fresh layer is applied. It is essential to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double glazed window repairs near me-glazed window, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze, it may be hinges at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to change a window hinge however it is easier if someone helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of inadequate installation at the factory. This can often be resolved by sending us a photograph on our website. We will be pleased to offer you suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges, also due to wear and tear may become displaced, which causes gaps to develop between the sash and the frame. If they are beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window and can be misaligned. Again, it may be possible to just give them a clean but in certain cases, it may be necessary to have them replaced.

The next common reason for draughts is window seals, these can become worn down or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it may be cheaper to replace them than to repair them. If you encounter any issues with your Upvc window, it's best to consult an expert as soon as you can.