Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't rust or rot.

It is essential to clean and oil Upvc window repair doors and windows on a regular basis. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows, it is relatively easy to replace them, and the new window will generally fit within the old frame very easily. However If windows with double panes are secured by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass to ensure that any shards fall onto the cloth rather than on the floor, where they could be trampled upon and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will prevent water and drafts from entering your property until a professional comes out to repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is large, you might be interested in a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll need open the window so that you can access the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for fitting. If you're satisfied with the fit, tighten the screws to ensure they remain in position.

If you aren't able to move the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it can be caused by the handle mechanism getting worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to close the window and then perform a test fitting. The corner joints of the sash should align with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is essential to act if you awake each day to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the problem the caulking that was used up may need to be removed before a fresh layer is applied. It is crucial to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

Verify that the drainage holes are free of debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more related to the seal, not the frame. This can be easily fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens with a breeze. These are easily repaired by any skilled DIYer and can be completed in just a few minutes.

Like any mechanical part hinges will be damaged over time. It's very simple to replace a hinge on a window, but it's easier if someone else helps you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain manner or because of poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are always happy to give suggestions.

It is also essential to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different things. The hinges, also because of wear and tear, could become misaligned. This causes gaps to develop between the sash and the frame. They can be fixed by giving them a thorough clean, however if they are beyond repair it could be necessary to have them aligned or replaced. The second is the interlock, which is on the hinge side of the window, can also be misaligned, and again it may be feasible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The seals may wear out or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and decrease draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window repair sill. These will help to stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to replace them than to repair them. So, if you're experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.