Fiat 500 Key Fob Replacement

If your 500 key fob isn't working Try using a different one to see if the car will detect it. If it does, the issue is likely to be related to the original fob's battery, or water damage.

First, replace the battery. Make sure that the new coin battery is inserted correctly, with the "+" side facing down on the fob.

Dead Battery

The battery is typically the reason behind the fob's inability to function. It's not difficult to fix and the majority of fobs will give you a warning if the battery is not fully charged. You can find the instructions on YouTube for nearly every key fob for your car, or in the owner's manual. You can also change it by taking it to the locksmith or dealer who has sold it to you.

Sometimes a fob will stop working due to a problem in the internal circuit board. This is a bit rare but it is possible to occur. The internal chip could be damaged in the event you drop the fob on something that is hard. This is also the case if you use an aftermarket key and the fob won't work. In this situation, you will need to visit a dealer or a locksmith and have it reprogRammed to work with your 500.

One 2012 fiat 500X key 500 Flip Key Remote - Look-alike Ilco brand with trunk, lock and lock buttons. It is a replacement fiat 500 keys derby keyless entry remote (will require cutting and programmed by locksmith)

Chips Damaged

Fiat 500 key fobs are wireless devices that send an alert to the car when you press the button. It is equipped with a microchip that contains information about the code that will allow it to communicate with the car. If the chip is damaged it won't transmit the correct code, and the car won't start. Locksmiths can repair this type damage. United Locksmith is capable of providing this service for old models as well, as for newer ones, so don't be uneasy about calling them.

A locksmith can program the new key fob. This is a lot less expensive than going to the dealer and will work similarly. A locksmith will need some specific details from you, such as the year in which your vehicle was manufactured as well as the model's name.

If you're not sure of the best solution to this issue try scratching the chip with an US dollar bill. The copper in the bill is abrasive, and will remove dirt and oxidation. However, it won't harm the microchip. If the chip is physically damaged however, it may not be in a position to be repaired. This could happen if you drop it or get it pushed over by your vehicle.

Water Damage

Whether you accidentally dropped your keys in the pool, threw them in your bag while swimming at the beach, or splashed them with water on a rainy day It's likely that your fob will have some water damage. Even if there's only tiny amounts of water on the key, it can cause major problems for its electronic components.

The good news is that you can solve this problem by removing the key fob and using the paper towel to cleanse it of any remaining water or dirt. Once the fob has dried, you can then replace its battery and it will begin working again.

You can also take it to an auto repair shop or locksmith to get it professionally programmed and cleaned. They will be able to use special equipment to ensure that the key fob is compatible with your car's computer system.

If your Fiat 500's key fob ceases to work, it could be a stressful and frustrating. It can be expensive and inconvenient to take your key fob to a dealer. A locksmith can replace your key fob, without having to visit an establishment. This is why they are a better choice than the dealership.

Pairing Issues

When you drop your key fob, or it stops working and there is nothing problem It could be due to the chip that has gone off the rails. This could be due water damage or a dead battery. it may be due to a need to reprogramme.

This is often done by simply following the instructions in the owner's manual. However it's recommended to hire an automotive locksmith take care of this if you're having trouble or the instructions in the manual don't work for you. This will ensure that the chip won't be damaged and is the least expensive option.

Another issue with 500 owners is that the key fob will not lock the car. This can be a problem if you want to fill up at gas stations. Some owners have stated that the locking system of their 500 malfunctioned and they've required replacement of the entire intermediate steering shaft. Fiat has even mentioned this problem in a technical bulletin (TSB).

If you're having issues with your Fiat car, a reputable locksmith can help. They'll be able to duplicate the key you have or design a new one that will lock and start the car. They can do this without seeing your old key, and is usually less expensive than buying a key from the dealer.