Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good repair.

For single pane windows, it is relatively easy to replace them, and the new window will generally fit within the frame that was previously installed easily. However when you have double-pane windows that are anchored by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this situation you'll need find some plastic spacers that will help the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and repair the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is large, you might think about an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they are susceptible to a range of issues, including sliding. A sagging window in upvc window repair can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll need open the window so that you can access the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the fit of the window, tighten the screws to hold them in the right position.

If you aren't able to move the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

Upvc Window Repair handles can also become loose. Often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close your window and do an experiment to ensure that it fits. The corner joints of the sash must align with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's crucial to take action. The leaks of water from windows do are not just a cause for destruction of your home's structure but also hamper your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on how severe the problem is, the old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more with the seal than the frame. It is also possible to be fixed by an upvc window repairs near me window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with ease It could be hinges at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. It's very simple to replace a hinge on a window but it's much easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or by poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be happy to give you suggestions.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. The hinges can also become misaligned due to wear, which can cause an opening between the frame and sash. These can be easily fixed by giving them a good clean, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. In addition, the interlock could be misaligned. It is located on the hinge side and may need to be cleaned. In certain instances, it may be necessary to replace these.

The second most frequent reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it is more cost-effective to simply replace them than to repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.