Multi Fuel Stoves With Back Boiler

A multi-fuel stove equipped with a back boiler can be used to heat your home and provide hot water. They have 2 water ports (1x return & 1x flow) that are 1 inch BSP in size and connect using standard compression fittings.

Features

Multi fuel stoves with back boiler can be used to burn an array of materials other than logs - this allows you to choose from a wider range of sources of heat, allowing you to cut costs and reduce your carbon footprint. Multi fuel stoves are designed to burn a greater range of materials more efficiently than wood-burning stoves. In addition to the standard logs, multi fuel stoves with back boilers will be capable of burning smokeless coal, multi fuel stoves with Back Boiler anthracite, peat or turf briquettes. They can be equipped with a raised grates with moving bars, or with a central riddling grates and asphan. Both of these will enable the stove to de-ash frequently. Ash will be contained in an asphan below the area of combustion, to allow for the safe and efficient removal.

Boiler stoves can generate up to 21kw of heat (14kw to heat water and 7kw to heat space) dependent on the model. They can be connected to hot accumulators or a conventional boiler system and/or work in conjunction with solar panel systems when required. The boiler is housed within the stove, usually in the back or side of the firebox. It is made from the thickly rolled steel, not the fragile cast iron.

This means that it is designed to withstand higher temperatures than cast iron stoves, and therefore is less prone to rust. The boiler is installed in the stove or purchased separately. There are usually two pipes (or sometimes four) that protrude out of the back of the stove to connect to plumbing pipes.

The pipes can be connected to a hot water cylinder or directly into the radiator circuit of your home, with pumps switching on when the temperature in the tank is at the desired level. This will ensure that your radiators are heated first prior to the hot water for cooking and bathing is provided - a good method to keep your bills low while protecting against freezing conditions in winter.

Benefits

The addition of a back boiler to multi fuel stoves provides additional benefits to heating your home. In addition to the heat that it generates from burning wood and other types of solid fuel, a multi fuel stove with back boiler can also heat your hot water system. You can reduce the amount of oil, gas or electricity you use in your home and also reduce carbon emissions.

The heat produced by the multi-fuel stove and the back boiler is used to warm the cold water that flows through the bottom. The hot water can be used to heat your home, and even for bathing and hot water taps for domestic use.

When properly installed, a boiler stove can be used to supply hot water to a small multi fuel stoves for sale or larger central heating system or thermal store, which will give you more energy efficiency and lower energy costs in your home. It can also be paired with solar panels or underfloor multi fuel stoves with back boiler heating to further reduce your home energy bills and carbon footprint.

Multi-fuel stoves that have back boilers can be used as a simple wood-burning system for central heating or to connect to an accumulator tank. This is a versatile and cost-effective method of heating your home. You can mix a log boiler with a back boiler and an existing gas central heating system in order to save money on the installation and operating expenses.

Stoves that are eco-friendly make use of up to six times less fuel than earlier models and will aid in reducing your fuel bills and also cut down on the environmental impact. A variety of models are available for stoves that are able to provide hot water to those capable of heating up to 22 radiators and providing you with all of your hot water requirements too.

Most multi fuel stoves with a back boiler feature an easy bolt-in system that has two pipes protruding through the back of the stove and ready to connect to your plumbing pipework. Some models have a "water-jacket which means that the body of the stove has a cavity which can be filled with hot water and usually with an electric pump.

Installation

The Ruben is a striking stove that features a large ceramic window, silver door handles/controls, and a back-boiler integrated to provide central heat and hot water (up to 7kw for water heating and 8kw room heating). It comes with two water ports on the rear of the stove (1x flow and 1x return) which are sized at 1.0 inch BSP (male 1 "''). It is able to be used with either vented or unvented stoves.

A multi-fuel stove with back boilers can be attached to central heating systems by with a simple non return valve or to a thermal storage tank with an overheat valve. A thermal storage tank is a water tank that is insulated that serves as a neutral spot for the heat from the stove and stores it until needed.

If you want to install a wood stove with back boiler you will be required to confirm that your local authority is able to allow it, and that any insurance company is satisfied with the work carried out on a non-listed stove with back boiler. You will also need to ensure that your plumbing system is capable of handling the additional power that is going to be generated. In most cases, you'll need to have it re-plumbed in order to make this possible.

If your installer is experienced with this sort of work then they'll be able advise you on what is needed. Beware of sanitary plumbers who claim to be solid-fuel heating engineers. They may not understand the basic principles behind this kind of system. We at Stovesellers have been called on numerous occasions to rectify the mess caused by other tradesmen. We only suggest that you choose an engineer who understands the basics of what they do.

It is essential to be aware that you will require larger capacity cylinders for a multifuel stove which has a back boiler and the heat output from the stove should be carefully adjusted to the house so that you do not run out of water and spending money. Divide the total cubic meter (length as well as width and height) of the room by 14 to determine the model.

Maintenance

A multi-fuel stove with back boiler is a device that can heat both hot water and radiators. These stoves are great for those who live in smaller homes or want to reduce their carbon footprint by not relying on central heating systems.

The back boiler of these types of stoves is comprised of an extensive loop that connects the hot water tank to the radiators in your home. A thermostat in your home can monitor the temperature of the loop and when it reaches a set level, the pump for the radiators will turn on automatically. This will ensure that your heating is properly controlled and prioritised.

A multi-fuel stove that has a back boiler allows you to burn wood or coal. This allows you to have more flexibility in terms of your heating source. It is crucial to keep in mind that the boiler doesn't provide energy for free and you must include enough logs to meet your needs.

It is important to follow the safety guidelines for your area and across the world when installing a multi-fuel stove that has a back boiler. This includes the distance and position of your stove with respect to combustible surfaces. These recommendations can be found in the manual of your stove, or by consulting local codes.

When installing a multi-fuel stove, which has back boilers, people often make the mistake of not properly making the hearth. This can cause numerous problems in the future, so it's important to follow the right procedures.

The best way to ensure that your multi fuel stove that comes with a back boiler is installed correctly is by having it installed by an engineer who is registered as a heating engineer or HETAS technician. They will be able to verify that your stove is compatible with the existing system and that it meets UK safety standards.