Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they typically fit into frames that were previously in use very easily. However, if windows with double panes are anchored by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this instance you'll need source some plastic spacers that assist the new pane to fit properly into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any shards will fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

Once the glass has been removed from the window repairs near me, it's best to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, over time they can suffer from a variety of issues like sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sliding. To do this, you'll have to open the window so that you can get to the frame. With the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the fit, tighten the screws until they stay in position.

If you are unable to move the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and double glazed window repairs near me secure from draughts.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it can also be due to the handle mechanism wears out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close the window and perform a test to ensure that it fits. The corners of the sash must align with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is important to act if you get up each morning to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a fairly simple fix that can be done by any competent DIYer. Depending on how serious the issue is, the old caulking might need to be removed. When it comes to uPVC repair, you should avoid 'over-caulking'. This can make your window more difficult to clean and reduce its energy efficiency.

Verify that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double glazed window repairs near me-glazed glass, it is more likely that the issue is related to the seal, not the frame. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with ease It could be the hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical component hinges will be damaged over time. Changing a window hinge is essentially a very simple process, but it's easier with someone else to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular manner or because of inadequate installation at the factory. Sending us a photo through our website can often resolve the problem. We are always happy to give assistance.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. Firstly the hinges, again because of wear and tear, may become displaced, which can cause gaps to develop between the sash and the frame. If they are damaged beyond repair, it could be necessary to have them realigned. The interlock may be misaligned. It is located on the hinge side and could require to be cleaned. In certain instances it is possible to replace them.

The next common cause of draughts is the window seals, these are prone to wear or damaged over time and allow air to escape through the gaps. Installing high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They can keep your home warm by blocking cold air.

With a little maintenance and repair your windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually become worn out, and it is cheaper to replace them instead of fixing them. If you are experiencing issues with your upvc window repair window you should consult a professional as soon as possible.