Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to rot or rust like timber and aluminum.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and uPVC window repairs increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to make sure that your windows are in good condition.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If windows with double glazing panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this case you'll need to locate some plastic spacers that will assist the new pane to fit correctly into the window frame.

If you are going attempt to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a number of problems, including sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll have to open the window so that you can access the frame. Then, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and test it for fitting. If you're satisfied with the size of the window, tighten the screws to secure them in the right position.

If you are unable to move the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is typically caused by screws that have been removed over time, but it could also be due to the mechanism of the handle wearing out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and perform a test fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is a simple fix that can be accomplished by any DIYer who is competent. Based on the severity of the problem the caulking that was used up may require removal before a new layer can be applied. It is crucial to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris in them and that the sill pan has been properly angled to drain away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazing glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or upvc window repairs if it opens with the breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts hinges will wear out over time. Changing a window hinge is an easy process but it can be simpler if you have someone to help you hold the frame in place.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. This can be done by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The issue could be caused by opening the window improperly or by a poor installation in the factory. Sending us a photo via our website will often solve the issue. We are more than happy to give advice.

It is also essential to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. The ideal time to perform this every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges, also due to wear and tear can become misaligned, this causes gaps to develop between the sash and the frame. If they are damaged beyond repair, it could be required to realign them. In addition, the interlock could be unbalanced. It is located on the hinge's side and might require to be cleaned. In some instances, it may be necessary to replace them.

The next common cause of draughts is the window seals. These are prone to wear or damaged over time and let air escape through these gaps. Replacing these with high-quality weatherstripping will help to stop draughts. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder. These are usually fabric tubes which are filled with a type of filler. They can be positioned on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it is more cost-effective to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as possible.