UPVC Window Repairs

Upvc windows are energy efficient and can help to reduce heating bills. As they age, however, problems may arise that require to be fixed. This could be due to damaged hinges, handles or locks.

DIY enthusiasts can fix wooden windows fairly easily. It can be cheaper than buying a brand new window.

Cracks

Cracks and fractures can pose a serious problem. If windows are not properly repaired, they can result in water intrusion and less effective barriers to cold weather, and can cause structural damage. Find a local builder who specializes in repairing uPVC frames. They must have the required skills and experience, as well as the equipment needed to achieve the best results. This will ensure that your fracture is repaired quickly before it gets worse, and you won't have to replace your window unit or glass.

There are many home-based solutions that can be used to repair small cracks in the glass. Masking tape and super glue are among the most common products that can hold broken glass in place for a time. For more severe cracks, the tape may need to extend beyond the crack on both sides for best results.

Additionally, two-part epoxy can be used to fix broken or cracked glass. The majority of hardware stores offer this product at around $10. Make sure your workspace is prepared prior to mixing the epoxy. Also, ensure that you have all the tools needed for the job.

If your lower or upper sash is difficult to raise it's most likely because the cords on the sash weights are damaged. This is an easy fix that is done with a ladder and flathead screwdriver. A rotted dripcap can also be replaced at home. Rot-free drip caps are readily available at many home centers and can be secured with nails and caulked in place with ease. Make sure that the glass of double glazing or triple-paned window isn't cracked. This is because the gases that are leaking out between the panes are responsible for enhancing energy efficiency. They should be retained and not released.

Water Leaks

If your uPVC window is leaking, this can cause damage to your interior and cause costly repairs. Water leaks can also weaken the structure of your house and cause mold growth. It is important to fix any issues caused by leaky windows immediately to prevent the damage.

A damaged sealant around window frames is a typical reason for leaks. Silicone caulking can restore the seal to its original state and prevent leakage. Look for gaps and cracks around the window frame, and also the brick or stone wall surrounding your windows.

A blocked drainage hole or an issue with Flashing are two other common causes of leaking windows. It's important to check that the drainage holes are free and unclogged, especially during heavy rainstorms. It's also a good idea to inspect the flashing that runs around the top of your window and make sure it's properly sealed.

It's also crucial to ensure that your drip cap doesn't have any decay or is missing. A rotted or missing drip cap will let water in the window from above, causing damage to the structure of your home. Replacing a leaky drip cap isn't difficult. It's as simple as purchasing an entirely new one and nailing it into place.

A professional can also check your windows for watertightness. They can use a special tool to measure the water-tightness of your windows to ensure they meet the industry standards. If your windows fail the test, they'll require replacement. It's a costly fix, but is worth it to ensure the safety and comfort of your family.

Sagging

If your windows aren't closing properly it can cause many issues, such as drafts condensation, and an increase in energy bills. It could be a sign that the windows were not properly fitted when they were installed or that the sealant has stopped working. Fortunately, there are some things you can do to fix the issue.

In order to repair your window properly, you need to set up a work space that is well-lit. Begin by laying newspaper or an old blanket on the floor to protect it from any drips or splinters that might be coming from the window while you work.

Use a white cloth soaked in a mix of water and detergent. This will ensure that you do not leave any color stains on your windows. If you're ready to work on your uPVC windows, start by making note of where the hinge channel should be located. Then, remove the channel from the frame and fill the screw holes with epoxy (for Upvc Repair uPVC windows) or wood filler (if frames are made of wood). Be sure to scrape the hole you have filled before it sets.

Install the hinge channel after the holes are filled. Make sure it is centered on the window jamb, and that you drill the new screw holes about quarter inch away from the original locations.

Then, measure the length of the spindle that protrudes from the underside of the handle and order a replacement on the internet or bring your old one to the hardware store to purchase a new. Then, remove the setscrew from the operator shaft. Smooth it down to allow the set screw to secure onto the shaft. Now, your uPVC windows should close without a hitch.

Broken Hinges

There will be a problem opening or closing your uPVC windows in the event that the hinges are damaged or aren't working correctly. This can be a security risk and could also hinder your home from staying warm or cold. You can easily purchase a new hinge for your uPVC window. It's crucial to choose the right type for your windows.

This is because the hinges need to be the same width to fit inside the window frame. The most popular hinge for upvc Repair windows are standard 18mm or UPVC 15mm hinges for windows. There are also specialised hinges for wooden frames. Choosing the correct window hinge for upvc repair your windows will aid in avoiding common issues that homeowners face with their windows, such as not closing properly.

There are a variety of reasons the hinges on your windows be loose or stiff. One of the most common causes is that the hinges aren't tightened enough. To check this, use a screwdriver and locate the friction screw on the hinge's end. Release it. Then, you can adjust the hinge by twisting it in any direction until you achieve the desired result.

If your UPVC window hinges aren't working as they should, call Preston Glass Fix for a quick repair. Our experts will assess the condition of your hinges and give you advice on the most suitable solution. We can repair or replace the window hinges, re-tension them, or install new locking mechanisms to ensure that your UPVC windows are secure and safe for years to come.

Locks that aren't working

UPVC window locks and mechanism are an essential part of home security. they make it extremely difficult to open the window without breaking in. It can be a frustrating experience when a lock malfunctions, but you don't need to replace the entire window.

It is often an issue that is minor and could have easily been avoided by regular maintenance. This is the reason we recommend getting your uPVC windows maintained regularly using our yearly maintenance package to reduce the chance of having problems.

Modern uPVC windows are equipped with espagnolette locks. They work by pushing the nose of the handle over the block with a wedge, and then turning it to close the lock. They are effective at locking the window, however when they are not maintained correctly, over time they can begin to fail. We recommend lubricating them with WD-40 a couple of times a year.

If you find that your uPVC window isn't opening or closing as easily as it used to or if the lock doesn't function correctly, it could be a problem with locking gearboxes within the frame. It can be difficult to access as it requires the removal of the seals that surround the frame of the window and then removing the handle.

A locksmith who specialises in UPVC repairs will have the expertise to diagnose this fault quickly and be able to replace the failed locking gearbox with a exact replacement. This quick and simple fix could save you hundreds of dollars by not having to buy new windows.