Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, Repair My Windows And Doors and the new window is usually able to fit into the frame that was previously installed easily. However, if you have double pane windows that are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation you'll need source some plastic spacers that will help the new pane to fit properly into the window frame.

If you're planning to attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. You should also lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor and could be trampled under.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap between the window and the door is significant, you may need to consider an alarm system that includes a window. This will provide the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. In time, they could be affected by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to unblock the windows so you can reach the frame. After that, using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the fitting. If you're happy with the fit, you can tighten the screws to ensure they stay in the right place.

If you cannot reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. The majority of the time this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. You'll first need to close the window and perform a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is essential to act if you wake up every morning to discover mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking may require removal before a fresh layer can be put on. It is essential to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it blows open with an ease. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung upvc window repairs near me windows that are hinged and like any mechanical part they will wear out over time. It's easy to change the hinges on a window however it is simpler if you have someone to help hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be more than happy to give you advice.

It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges can also become misaligned due to wear, causing gaps between the frame and sash. If they're beyond repair, it may be necessary to have them realigned. In addition, the interlock could also become unbalanced. It is located on the hinge side and might require to be cleaned. In certain instances it might be necessary to replace them.

The seals may wear out or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder, these are usually fabric tubes filled with some type of filler. They can be placed on the windowsill on top. They can keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it could be more cost-effective to simply replace them rather than Repair My Windows And Doors them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as you can.