Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the old panes. In this case, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass to ensure that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trampled on and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your property until a professional arrives to fix the Window repair borehamwood. This will also act as a barrier, preventing any intruders from getting access into your home. If the distance between the window repairs Hounslow and the door is large, you might need to consider security screens that has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, over time, they are susceptible to a range of issues like sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act immediately if you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to open the windows to reach the frame. With the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fitting. If you're satisfied with the fit, tighten the screws until they remain in place.

If you are unable to reposition the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. The majority of the time this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close your window and do an initial test to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is important to act if you wake up every morning to discover mouldy walls and wet floors. Windows that leak water do not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature within your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a relatively easy fix that can be completed by any DIY expert. Depending on how severe the problem is, the old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak is coming from between the glass in your double glazing repair amersham glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease it could be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part hinges will be damaged over time. It is essentially a very simple process but it can be easier to do with someone else to assist in holding the frame in place.

Make sure that the uPVC hinges are open and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused by opening the window improperly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be pleased to offer you suggestions.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also lower the chance of windows getting stuck and stop corrosion. It is recommended to do this once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also become unbalanced due to wear, which can cause a gap where the sash and frame meet. They can be repaired by giving them a thorough clean, Window Repairs Hounslow however if they are beyond repair it may be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge of the window, may also be misaligned, and again it is possible to just give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and lessen the risk of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically fabric tubes filled with some kind of filler. They can be placed on top of your windowsill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and they may reach the point when it's more efficient to replace them than fix them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance immediately.