Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. If windows with double glazing repairs Sidcup panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you plan to try to remove the window panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric and not on the floor, where they could be trampled under.

Once the glass is removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the home until a professional can come out and fix the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a variety of issues such as sliding. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your uPVC window repair Southend is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll need open the window so that you can get to the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for fit. If you're satisfied with the fit, window Repair Southend you can tighten the screws until they remain in position.

If you cannot reposition the hinges, you may have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen up. The majority of the time this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. You'll first need to close the window and do an experiment fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how serious the issue is, the old caulking may need to be removed. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This will make your window harder to clean and reduce its energy efficiency.

Make sure that the drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double glazing repairs Cambridge glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with ease it could be hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It's very simple to change the hinges on a window, but it's simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can do this by looking for the arrows on each hinge, this shows which way the window should be opened.

The issue could be caused by opening the window improperly or by a poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to offer suggestions.

It is also crucial to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It also helps prevent corrosion and decrease the chance of sticking. It is recommended to perform this every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, which can cause gaps where the sash and frame meet. This can be easily repaired by giving them thorough clean, however if they are beyond repair it might be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it's possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time, and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. It is important to remember that all windows will eventually become worn out, and it could be more cost-effective to simply replace them instead of fixing them. So, if you are having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.