Window Repairs

Window repairs can save homeowners money and keep their homes comfortable. In the event of major damages such as broken glass or a damaged frame, window replacement may be required.

Many other issues can be fixed to extend the life of windows. Some common issues include:

Broken or cracked panes

Whether it's an errant rock being tossed by your lawnmowers, or a tree branch that has been blown by high winds, damaged windows are not just visually unappealing, but also can result in more expensive electricity bills because the broken pieces let cold air to enter your home. It's fairly simple to repair windows with damaged panes.

Begin by carefully removing the glass using gloves and safety glasses. You may have to use a utility knife to loosen any remaining putty or glazing compound around the edges of the frame. Then, use a gentle paper towel or cloth to wipe the glass's surface and the frame's wood.

Once the area is clean and dry, apply a waterproof silicone caulking on the frame's perimeter. This will stop water from entering the frame through the cracks and causing further damage.

A bad crack in double glazing Acton-paned glass could compromise the gas between the panes, making your windows less insulative. If the crack is so extensive that it is threatening the structural integrity of the window, Repairmywindowsanddoors or if the inner pane is missing, you may need to call an expert.

Cracks in thermal stress can happen when there's a dramatic difference in temperature between the inside and outside of your home, which causes the glass to expand or contract. If this happens across two windows it's best to replace the glass instead of trying to repair it.

Clear tape can be used to fill cracks in windows that are not yet ready to be replaced. It will also keep out cold winds and bugs. You can also cut an amount of nylon stocking big enough to completely cover the crack and glue it with duct tape. It's not a permanent solution, but it's a good way to keep insects out and cold air away from your home. If you notice cracks or blemishes on your windows that are older it is recommended to contact your local business to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is a typical problem for windows. It can damage a home's appearance and pose a safety risk. However, it is possible to fix rotted wood. First, you must determine the root of the wood's rot. Look for leaks on the roof and other areas where water can enter the wood.

The next step is to remove any rotten areas of the window frame. This can be accomplished with a rasp, chisel or claw hammer. After you have removed the decayed wood, you'll have to replace it with fresh wood. Pre-treated wood is suggested for this task, since it will resist rot. If you cannot replace the damaged timber you can apply filler and wood hardener to strengthen the damaged area. Many hardware stores will sell this kind of product. Follow the instructions on the label of the product to ensure the most efficient results.

After you have repaired the rotten areas of the windowsill, it is important to protect the repaired area. This can be done by applying a water-resistant wood sealant. Sikkens for repairmywindowsanddoors instance is a fantastic product to apply.

You can also apply an epoxy filler that is two-part to protect the wood from further damage. This product is easy to apply and provides a good finish. However, it is very important that you follow the directions for application on the label. Once the epoxy filler has dried you can sand the surface of the wooden. It is best to begin with a rough grade of sandpaper and then move to a smoother one.

You do not want to expose the damaged area to more moisture. It is therefore recommended to cover the repaired area with an oil-based primer that will shield it from moisture. Then, you can apply the waterproof wood sealant.

Won't Open

There are many reasons why windows don't open. The house may have settled or the wooden frames might have warped due to wet weather. Someone might have also nailed them shut for security. With a bit of patience and the right tools you can open most stuck windows.

One of the most common causes of a window that isn't able to open is the accumulation of debris or gunk on its moving parts. Grime and dirt build up on sliding tracks, hinges and locks over time, says Acme Glass. Metal hardware may also rust if it comes in contact with humidity and direct sunlight. Spraying grease on these areas will help prevent oxidation, and keep your windows functioning properly.

The pulleys that raise or lower the window can become loose, or break. These parts can lose tension and become obstructed if they are located at least two floors above ground.

If you are having difficulty opening a door, try using a pry-bar to gently push the window open. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window repair Chelmsford. Try running a hairdryer along the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A faulty spring can also be the cause of a window that won't lift or lower. You'll need to check your owner's guide for more information depending on who made your windows.

If you have tried cleaning the moving parts of your windows and then lubricating them but they still won't open it could be the right time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let windows in your home go from functional to useless. If your windows aren't properly closed could leave your home vulnerable for burglary and water damages. Contact our team for more information on our replacement windows and services today!