Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as timber and aluminum.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are fairly simple to replace and will usually fit into the frames that were previously in use very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the old panes. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you plan to try to remove the window panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor and could be trampled under.

Once the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the distance between the door and the window is substantial, you may need to consider security screens that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can develop a number of problems such as sagging. A sagging window can cause problems with light, draughts and even security. It's crucial to act immediately if you discover that your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows so you can reach the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, tighten the screws until they remain in place.

If you are unable to reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and window repair Hayes dry out, which causes them to lose tightness. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is typically caused by screws that have become undone over time, but it could be due to the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need close the window Repair hayes and perform an experiment fit. The corners of the sash must align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking may need to be removed. When it is time to uPVC repair, you must be careful not to over-caulk. This can make your window harder to clean and reduce its energy efficiency.

Make sure that the drainage holes do not have debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double glazing repairs Derby-glazed glass it is more likely the problem is with the seal than the frame. This can be easily repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease it could be hinges at fault. They can be easily repaired by any skilled DIYer and can be done within a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple procedure, but it is easier when you have a person to assist in holding the frame up.

Check that the uPVC hinges open and close in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused either by opening the window improperly or due to a poor installation in the factory. This can often be resolved by sending us a photograph via our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It also decreases the chance of windows sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges may also become disaligned as a result of wear, creating an opening where the sash meets frame. This can be easily repaired by giving them a good cleaning, but if they are beyond repair it might be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge of the window and can be misaligned. Again, it may be possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.

The second most frequent reason for draughts are the window seals. They can become worn down or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will reduce draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a life span and they may reach the point when it's more efficient to replace them than fix them. If you encounter any issues with your window made of upvc, it's best to consult a professional immediately.