Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and will usually fit into the frames of the past easily. If you have double Glazing repairs-paned windows which are joined by internal beading, it is difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric rather than on the floor where they could be trampled upon and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will prevent drafts and water from getting into your property until a professional is able to repair the Window Repair. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you may want to consider using an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sagging. A sagging window can cause problems with light, draughts and even security. It is crucial to act immediately if you discover that your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows to access the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it could also be caused by the handle mechanism getting worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to shut the window and then perform an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to act if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the problem the caulking that was used up might need to be removed before a new layer can be applied. It is important to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with a breeze, it may be hinges that are at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It is very easy to change the hinges on a window but it's much simpler if you have someone to help you hold the frame.

Verify that the uPVC hinges open and close in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be pleased to offer you suggestions.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. First, the hinges due to wear and tear can become misaligned, this can cause a gap to form where the sash joins the frame. These can be easily fixed by giving them a good clean, but in the event that they are beyond repair it may be necessary to have them realigned or replaced. The second is the interlock, which is on the hinge side of the window and can also be misaligned, and again it may be feasible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!

With a little maintenance and repair windows made of upvc will provide excellent security and window repair insulation for your home. It is crucial to realize that all windows have a life span and there may come a point where it is more cost-effective to replace them rather than repair them. If you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as you can.