Double Glazed Window Repair

Double glazing is an energy efficient investment that prevents loss of heat in winter and keeps your home cool in the summer. Having your double glazed windows repaired as needed is a great way to keep them working properly.

Over time, your double glazed windows can suffer from issues such as condensation and misting. This can cause your double-glazed windows to be difficult to open or double glazing repair shut.

Broken Panes

A unruly ball, a flying stone from your lawnmowers, or a storm that is strong enough can break the double pane windows of your home, leaving you home vulnerable to the elements. Although a window that is cracked can be difficult to fix however, you don't have to replace it entirely. The insulated glass between two glass panes is in good condition, so you can repair your double-paned window on your own.

First, you'll need to take any broken glass from the frame. Be careful to avoid any glass shards falling to the floor or falling off the frame. Wear gloves for you hands, and an abrasive cloth around the damaged glass area to prevent further damage or cuts. After taking out the broken glass, clean the frame of the window thoroughly to remove any sealant or other debris. It is essential to sand rough areas of your frame to ensure a smooth surface for your new glass.

Once the frame is cleaned, you can apply a fresh layer of glass to the area where the broken pane was removed. This is the most effective way to ensure that your window is sealed and protected, and it will save you money by preventing drafts and water from entering your home. Next, you will need to choose the right glazing material. There are several options available, including clear tape that is more durable than regular tape and will keep your window safe from further cracking, and glazing film that resembles clear plastic wrap. This type of wrap has the advantage that it can be painted to match your frame, and can also shield your windows from snow and ice.

Whatever material you pick regardless of the material you choose, it is essential to press glazier's points into the place where the putty joins the frame. These will hold the glass in place, and will help it stick to the frame. You can find glazier's points in hardware stores, and they come in pre-made ropes that you simply roll out onto the frame rabbets.

Condensation

If you are experiencing issues with condensation, it is best to call your window manufacturer. Many companies offer warranties and guarantees that cover the issues. Fogging or condensation between the windows' panes is a sign that the seals are damaged. Only a professional can resolve this issue by replacing both panes.

This procedure is a bit difficult and double glazing repair requires the use of specific tools to remove the old one and replace the new one, but it can be done by an expert who will provide the necessary equipment. Using these tools can be dangerous it is recommended to leave this kind of job to a professional.

If you do decide to do this yourself, make sure you wear safety glasses and installing gloves to shield yourself from any broken pieces of glass that could fly off during the process. It is also important to remove all the putty and metal glazing points from the grooves in which the new window will be. You should also brush the frame with wire and vacuum or wipe it clean with a damp cloth. After the frame is dry it is time to order another piece of glass that is 1/8" shorter in both directions than the existing window. Check the glass's fit into the grooves.

Depending on your frames depending on your frames, you'll need to apply a layer of silicone caulk on the grooves to ensure that your new pane is secure in the right place. After the silicone caulk has dried, you can smooth it out and make any necessary adjustments. The wood molding can be reinstalled.

Double-glazed windows may be difficult to open or close in the event of extreme weather. Extreme temperatures can cause the frames to shrink or expand and this can make them fall or stick. Try wiping the frames with water and then lubricating them if this is the case, but it may be better to consult the company that installed your windows.

Misunderstood

Misted Double Glazing is a window problem that is caused by moisture getting trapped between the glass panes of your double-glazed windows. Double glazing is comprised of two glass panes that are separated by an insulating area, typically filled with argon gas for improved thermal efficiency. This creates an airtight sealing that keeps warm indoor air inside, and cold outdoor air out.

Over time however, this seal can break down and moisture can begin to build up between the window panes, which causes them to become cloudy. This happens because the space between the panes gets heated by the sun, causing water vapour to build up within it.

This is a normal process but if it happens between the window panes it could cause problems as it will no longer be able to control the temperature in the room, and allows the outside temperature to affect the indoor temperature. Northfield Glass can help you if your double-glazed windows start to mist.

We can replace the blow-sealed unit without having to replace the whole window, which is a lot less disruptive than a total replacement. Our misty glass repair involves taking off and cleaning the unit of glass, then replacing it with a new one. This will result in a watertight seal again.

There are companies in the field that claim to cut holes into your windows that are misting and inject chemicals into them that they claim will eliminate the fog & condensation but we do not recommend this method. This is not only unattractive, but could also damage the toughened glass, leaving you with a window which does not function properly.

It is essential to address the issue as soon as you can, as if untreated it can result in the growth of mould that not only damages the window but can also pose health risks to your family members. Moisture can cause other problems in your home, including dampness or rot. In certain cases, the window may need to be replaced completely.

Blown or failed

Double-glazed windows are comprised of two glass panes with an inert or air between them. This improves their thermal efficiency, allowing the cold out and heat in. Over time, the gas can become depressurised and cause a variety of problems.

Condensation between panes is one of the most frequent. While it is a natural phenomenon, it doesn't mean your window is damaged however it could be an indication that you need to re-seal your windows. Condensation can be an indication that your double glazing is damaged, in which case it's time to get it replaced completely.

Also, look out for drafts coming through your double-glazed windows. This could be because of a failed seal, a broken handle, or a broken lock. It is crucial to address this issue as soon as you can. A draught will cause you to spend more on heating. Check the seals around the window frame by feeling for cold air.

You will also notice water beads on the interior of windows if your window seals aren't performing as they should. This is an indication that you need to seal your double-glazed windows.

Your window frames are designed to move slightly as they have to do in order to keep the glass sheets in place. As time passes, this particular packaging material could become compacted. This can cause the seal to be broken. This will allow the air to circulate between the panes, reducing your window's energy efficiency.

Double glazing that has ruptured a seal is an indication of failure and should be repaired as soon as possible. A blown seal will prevent your double glazing from fulfilling its primary job of keeping cold out and warm in. A blown seal could let moisture in your home, which can lead to mold and other unpleasant conditions. You should call a double glazing repair specialist immediately if you discover a blowing seal in your double glazed windows, since they could replace the whole unit.