Double Glazing Door Lock Repairs

Are your uPVC door or window mechanism not working properly? Perhaps the door or window handles aren't aligned properly or are hard to use.

You'll be wasting energy when your double-glazed doors do not perform as they should. This also increases the chance of burglary. Owen the Locksmith will be able to fix your door lock at an affordable price.

Snapped Key

It can be quite frustrating when a key gets stuck into a lock. It's also potentially a security risk, as the door may not be locked and leave you open to intrusion. Fortunately, there are some simple fixes you can try to resolve the problem and get your door operating properly once more.

Be calm. If you panic you may end up pushing the damaged key further into the lock.

Spray WD-40 or another penetrating lubricant into the lock. This will allow the broken piece to come out more easily. You can also make use of a screwdriver to break pieces that could be blocking the way. If you're lucky enough to have a small piece of the key left sticking out, you can make use of a paperclip, or any other thin metal object to grab it and pull it out. Both of these methods work well, but be cautious not to push the damaged piece of the key even further into the keyway.

Some paperclips have grooved edges, which can be used as a hook extractor, and some jigsaw blades are also suitable for this use. If you don't happen to have one of these tools you can bend a hook using needle-nosed pliers. Additionally, you can make use of a pair of tweezers to grab and pull out the last piece of broken keys.

If you cannot remove the broken piece of key then you can use a lock deicer. It's usually found in most hardware stores, and it works by freezing any moisture or ice that may be inside the lock.

If none of these solutions work, it may be time to consult a locksmith. Fitlocks experts can quickly resolve issues with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also reconfigure your double glazing door mechanisms to allow them to operate more easily. Book a double glazing repair via our website, or give us a call to discuss your needs.

Broken Cylinder

A broken cylinder can be a serious security risk. A locksmith professional can fix the cylinder. Locksmiths will need to tap the cylinder in order to fix it. They can do this using an hammer or another tools, but the most effective way is to employ a long match or piece of wire. Place the match or wire's end close to the keyway. The locksmith can then strike the lock in order to break it. This is better than using a hammer, which can cause damage to the lock.

The most common cause of cracks in the cylinder head is overheating. This can happen when the block and the cylinder head are made from different metals, such as cast-iron or aluminum. Different metals can be heated and cool at different rates. This can cause localized hotspots to expand quicker than the rest of the cylinder.

Corrosion can be a cause of cylinder fractures. If the cylinder block and head are not maintained in a timely manner, they can rust or corrode, which can cause them to expand more than expected. Over time, this can also cause cracks.

If your uPVC door or window lock is stiff or requires lots of pressure to turn, it can be caused by several things. This can be caused by a faulty locking mechanism or misalignment, as well as a worn-out handle.

Fortunately it is a simple and affordable fix for the majority of double glazing owners. A professional locksmith will usually be able to solve this problem within an hour of arriving at your property. Based on your requirements they will be able to replace the locking mechanism, replace the window handles, or change the gearboxes. A skilled locksmith will always be able to provide you with a recommendation of the most cost-effective solution for your home. They can even recommend upgrades to the highest-security 3 Star euro cylinders TS007 that provide an extra layer of security against burglars. It's a small price to pay for the peace of mind that comes with knowing your uPVC doors are safe.

Broken Handle

It's not a surprise that window handle locks could break. They have intricate mechanisms which deteriorate over time. It isn't easy to determine the reason for the broken window handle lock and repair it correctly.

If the issue is in the internal locking mechanism or the latch, fixing the broken handle will increase your uPVC double glazing door's security and allow you to stop the draughts. It can be expensive to repair or replace your handle incorrectly and it could also harm the frame and the lock of your door.

Screwdriver Open the window remove the screw that holds the handle. It should be located on the inside of the back plate, normally concealed by a screw cover for aesthetic reasons. It is important to not be able to replace any internal parts of the handle such as the levers and plates on either side. Keep them in the same arrangement so that it is easier to replace if necessary.

Next, turn the handle until it's 90 degrees to the window frame. Finally, loosen the screw on the back of the handle that fixes it to the internal spindle using a second screwdriver. Once this is released, you'll be in a position to pull the handle away and pull off the damaged spindle. Replace it with a brand new spindle, making sure it's the same length (you can find them online or at hardware stores). Screw it into the correct position. Be careful not to tighten too much as this could damage the handle or the window frame.

Close the handle and try it. It should work smoothly, and you will be able open your window once again.

Be sure to double-check that your uPVC window is shut correctly while you're working with the handle. If they aren't closing properly, you may experience draughts or damp in your home. It could also affect the energy efficiency of your home. A local window company, such as Core Sash Windows, will be capable of adjusting the hinges on your window replacement frames to ensure they shut correctly.

Broken Spindle

It is more likely for the spindle to break than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle to operate an locking device within the window frame. The handle is attached a central rod which activates mushroom-shaped locking cams that secure the window frame keep. If the dead latch mechanism does not open when the handle is turned, Double glazing it's likely the spindle is broken. This could be a problem that is frustrating.

Fortunately, there are options to rectify this issue. A professional locksmith can quickly and efficiently repair this issue. They can disassemble the window handle by using a tool that removes the wheel portion of the mechanism where the spindle is. This is done without damage to the handle or window frame.

After removing the wheel, the technician can inspect the spindle to determine the cause of the break. This involves disassembling the spindle, and then examining each component part, noting any damage or excessive wear. This process is usually carried out by technicians working in a clean and safe environment.

The next step is to clean the damaged spindle, this helps eliminate any dirt or other debris that might be obstructing its normal functioning. After that the spindle can be repaired or replaced. If the technician is replacing the spindle, the dowel can be used that is similar in size to the original. The technician will then make holes in the same way into both pieces. This will ensure that the new spindle has an exact fit with the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it completely. Home centres sell generic replacements, but if the style of your window is rare then it is necessary to speak with a woodworker or cabinet maker who can duplicate the exact model for you. Once the new spindle is in place it can be fitted to the handle by lining up the screw holes on the handle with the frames existing screws. Once the handle is firmly set, you are able to operate your uPVC windows.