Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they don't corrosion or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the frame of the previous one easily. If windows with double glazing panes are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you'll need to source some plastic spacers that help the new pane to fit correctly into the frame of the window.

If you are going to attempt to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall on the fabric rather than on the floor where they can be trampled on and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and repair the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a variety of issues that include sagging. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a Window Doctor Near me that is sliding. First, you'll need to unblock the windows so you can access the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've moved your hinges. If you are happy with the fit of the window, you can tighten screws to hold them in the right position.

If you aren't able to move the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. The majority of the time it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need close the window and then perform an initial test fit. The joints at the corners of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. The leaks of water from windows do can not only cause destruction of your home's structure but also hamper your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the problem the caulking used previously may need to be removed before a fresh layer is applied. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you may need to think about replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can quickly spread throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with a breeze, it may be the hinges that are at the fault. They can be easily replaced by any competent DIYer and can be done within a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is essentially a simple process but it can be easier if you have someone to help you hold the frame in place.

Check that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular manner or because of improper installation in the factory. Sending us a photo via our website will often resolve the problem. We are happy to give advice.

It is also important to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. It is recommended to do this at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges may also become misaligned due to wear, which can cause an opening where the sash meets frame. If they're beyond repair, it might be necessary to have them realigned. The interlock may also become disaligned. This happens on the hinge's side, and might require to be cleaned. In certain instances it is possible to replace these.

The next most common cause of draughts is the window seals. They are prone to wear or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They can help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair windows made of upvc will provide a great level of insulation and window doctor Near me security for your home. It is crucial to realize that all windows have a lifespan and there may come an point at which it is more economical to replace them than repair them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as you can.