Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, double Glazed window repairs near me long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to make sure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the old frame very easily. However, if windows with Double Glazed Window Repairs Near Me panes are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards fall on the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block water and drafts from getting into the property until a professional comes out and repair the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap between the window and the door is significant, you may need to consider security screens that includes a window. This will provide the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. However, over time, they are susceptible to a range of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's important to take action when you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll have to open the window to get to the frame. With a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and test it for fitting. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you cannot reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows are waterproof and draught-proof.

UPVC handles can also loosen. The majority of the time it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window repairs near me and perform a test fitting. The corners of the sash should align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how serious the issue is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely that the problem is with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze It could be hinges at the fault. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts hinges will wear out over time. It is essentially a very simple process, but it's simpler when you have a person to help you hold the frame in place.

Verify that the uPVC hinges are open and closed in the right direction. This can be done by looking for the arrow on each hinge, this indicates which way the window should open.

The issue could be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo via our website will often resolve the problem. We are always happy to provide assistance.

It is also crucial to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant on the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges, also because of wear and tear, may become displaced, which will cause gaps to develop where the sash meets the frame. This can be easily fixed by giving them a good clean, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. In addition, the interlock could also become misaligned. This is located on the hinge's side and could require to be cleaned. In some cases it might be necessary to replace these.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and they may reach a point where it is more economical to replace them than fix them. So, if you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as you can.