Double Glazed Window Repair

Double glazing is an energy efficient investment that prevents loss of heat during winter months and helps keep your home cool in the summer. Restoring your double-glazed windows as required is a great method to ensure they remain in good condition.

Over time condensation and misting could impact your double-glazed windows. This can cause your double glazed windows to be difficult to open or close.

Broken Panes

A rogue ball, a flying stone from your lawnmowers or a strong storm can shatter the double pane windows of your home which can expose your home to the elements. While a cracked window can be difficult to fix however, you don't have to replace it entirely. In fact the insulated glass that is between the two panes is in good condition and you can repair your double-pane window with some DIY effort.

To start, you'll need to take the broken glass out of the frame. This is an unpleasant task, double glazed window Repairs and you'll want to be careful to stop any glass fragments from falling on the floor or falling out of the frame. Make sure you wear gloves to protect your hands and a cloth to cover the area surrounding the broken glass to avoid further damage or breaks. After taking out the broken glass, clean the frame of the window thoroughly to remove any sealant or debris. Sand rough areas of the window frame to create a smooth surface to install your new window.

After cleaning the frame and removing the dust, you can apply another layer of glass on the seam where you removed the broken pane. This is the most effective method to protect and seal your window, and will reduce your energy bills by preventing drafts and water from entering your home. The next step is to choose your glazing material. Some options include clear tape, which is a bit more durable than regular tape and will help keep your window from further cracking, and glazing film that resembles clear plastic wrap. The benefit of this option is that it can be painted to match the frame you have and will keep out snow and rain as well.

No matter what material you use it's essential to press the glaziers points into the seam where the putty meets your frame. These will hold the newly-formed glass in place and help it stick to the frame. You can find glazier's points in hardware stores, and are available in pre-made ropes that you roll out onto the frame rabbets.

Condensation

If you are experiencing issues with condensation, it's best to call the window manufacturer. Many companies offer warranties and guarantees to provide coverage for the problems. Fogging and condensation between panes of glass is an obvious sign that the seals between your windows are broken and can only be fixed by a professional who will replace both panes.

It's a difficult procedure that requires special tools to remove and replace the old window. A professional can handle this job and provide the equipment. It is recommended to leave the job to a professional. These tools can be dangerous.

Wear safety glasses and gloves if you opt to do it yourself. You could be exposed to glass fragments flying around. It is also crucial to carefully remove all putty and metal glazing points from the grooves in which the new window will be. You will also want to brush the frame with wire and vacuum or wipe with a damp cloth. After the frame is dry it is time to order a replacement piece of glass that is 1/8" shorter in both directions than your existing window repairs. Make sure the glass fits into the grooves.

Based on the frames you have, you will then need to apply a thin layer of silicone caulk to the grooves in order to ensure that your new pane is securely in place. After the caulk dries it is time to smooth it out and make any needed adjustments. Then the wood molding can be reinstalled.

If the weather suddenly changes, double-glazed windows can become difficult to open and close. Extreme temperatures can cause frames to shrink or expand and cause them to slide or become stuck. If this is the problem you could try wiping down the frames with water and then lubricating the joints. However, it might be best to ask the company that installed your windows for assistance.

Misted

If moisture is trapped between the glass panes it can cause misted double glazing. Double glazing consists of two panes, which are separated by a gap filled with argon to improve thermal efficiency. This creates a airtight seal that keeps warm air inside and cold outside air out.

Over time however, this seal can break down and moisture will begin to accumulate between the window panes, causing them to become cloudy. This occurs because the sun's rays heat the gap between window panes, which causes water to evaporate.

It is a natural phenomenon however, if it happens between the windows' panes it can be a problem because it will no longer be able to regulate the temperature in the room. Instead the temperature outside of the window will affect the temperature indoors. If you notice that your double-glazed windows are turning cloudy, contact the experts at Northfield Glass to investigate.

We can replace a single blown sealed unit without needing to replace the entire window. This is much less disruptive than a full replacement. Our misty window repair involves removing the glass, cleaning it, and then replacing it with a new one to make an airtight seal.

There are companies in the industry who claim to cut holes into your existing misted windows and inject chemicals into them which they claim will eliminate the fog & condensation, however, we do not recommend this method. This method is not only unattractive, but it could also damage the toughened glass and can result in a window that does not completely function.

It is essential to address the problem as soon as you can, because if left untreated, it could cause mould growth that not only damages the window but also poses health risks for your family. Moisture in the window can also lead to other problems within your home, such as damp or rot. In some cases it might be necessary to replace the entire window.

Blown or Failed

Modern double-glazed windows come with two glass panes, with an inert gas or air between them. This increases their thermal efficiency, keeping the cold out and heat in. Over time, the gas can become depressurised, leading to a number of problems.

One of the most frequently encountered is condensation between the panes. It's not a sign of a window repairs near me failure however it could be a sign you need to reseal the panes. Condensation could also be an indication of broken double glazing, which could require re-installation.

Also, look out for draughts that are coming from the double-glazed windows. This could be due to an unsound seal or handle that is broken, or a damaged lock. It is important to fix the issue as quickly as you can. A draft can cause you to spend more on heating. Check the seals around the window frame by feeling for cold air.

There will also be water beads on the interior of windows if your window seals aren't performing as they should. This is a clear indication that you will need to seal your double-glazed windows.

Your window frames have been designed to move a bit, which is necessary to keep the glass sheets in place. However, with time, this special packaging material can become compacted and this will crack the crucial seal. This allows air to move between the panes, reducing the efficiency of your window's energy consumption.

double glazed window repairs glazing that has ruptured seals is an indication of a failure and needs to be repaired as soon as is possible. A damaged seal can stop your double glazing from fulfilling its primary function of keeping the cold out and warm in. A blown seal could let moisture into your home, which can result in mold and other unpleasant conditions. It is important to contact a double glazing repair specialist immediately if you notice a blown seal in your double glazed windows, as they are able to replace the entire unit.