Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However when you have double-pane windows that are secured by internal beading, UPVC repair it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation you'll need locate some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

If you're planning to try to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth before you begin working on the glass so that any fragments of glass fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and repair the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap between the door and the window is substantial, you may need to consider a security screen that also has an opening. This will give you the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, with time, they can suffer from a variety of issues like sliding. A sagging uPVC windows could cause issues with light, draughts and even security. It's crucial to act immediately if you realize that your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows so you can reach the frame. Then, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to loosen. It is important to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. The majority of the time this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's a good thing that it's simple to repair the handle of a window replacement that is loose yourself. First, you'll need to close the window and do a test fitting. The corner joints of the sash must be aligned with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

It is essential to take action if awake each day to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature of your home. The most common cause for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on how serious the problem is, the old caulking may need to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This can make your window more difficult to clean and decrease its energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens in a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part, hinges can be damaged over time. It's very simple to replace a hinge on a window, but it's simpler if you have someone to help you hold the frame.

Check that the uPVC hinges open and close in the proper direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem can be caused by opening the window incorrectly or a faulty installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to offer suggestions.

Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also lower the possibility of a window sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges, also because of wear and tear, may become displaced, which can cause an opening to appear where the sash joins the frame. This can be easily fixed by giving them a thorough clean, however if they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock, which is on the hinge side of the window, can also become misaligned, again it is feasible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The seals may wear out or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. They can help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it may be more cost-effective to replace them rather than repair them. If you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as possible.